Home > Diecast Aluminum Enclosure >

  4S125B Enclosure
4S125B, 125B DIECAST ALUMINUM ENCLOSURE
4S125B Aluminum Enclosure


 
Alternative Views:


4S125B Diecast Aluminum Enclosure  - 4.77" x 2.6" x 1.39" (121.1mm x 66mm x 35.3mm)
price $6.34


125B Color
Click to view another 125B Color

  
125B Drilling Options
Click to view another 125B Drilling Options

  

Top Mount Jacks (In/Out jacks will be drilled on the north face of the enclosure)

If this checkbox is left blank, the 'stock' version of the enclosure will be drilled. BYOC layouts are exclusively Top Mounted Jacks. All other layouts come stock with Side Mounted Jacks. All layouts feature a Top Mounted DC Jack.


Shipping/Storage Boxes

  

Qty:  

  
Description Technical Specs Extended Information
 
4S125B Die Cast Aluminum Enclosure (Similar to Hammond 1590N1)

PLEASE READ BEFORE ORDERING
  • Please allow up to 5-7 business days for powdercoat enclosures
  • Pre-drilled enclosures also allow 1 extra business day
  • Translucent powdercoat colors will show any irregularities in the aluminum enclosure
  • Powdercoat irregularities will be disregarded if in close proximity to a drilled hole.
Features
Heavy duty A380 Aluminum alloy enclosure, oxidized finish for uniform paint and powder coat adhesion. Comes with stainless steel screws. Used by many of the top boutique guitar effects pedal manufacturers in the world. Also used in amateur radio (RC) applications and DIY hobby applications.

Average Customer Review: 5 of 5 | Total Reviews: 2 Write a review.


  0 of 0 people found the following review helpful:
 
Awesome! April 7, 2013
Reviewer: Nail Audio from Olympia, WA United States  
These are probably my favorite enclosures to work with. Very roomy high quality product. My only complaint is that the dimensions  listed above are for the base of the unit, Not the top face of the unit itself. This enclosure DOES slightly taper from the base to the top. You'll have to adjust any decals/measurements for screen printing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great for small stomp boxes October 26, 2011
Reviewer: Giovanni from State College, PA United States  
I bought this enclosure to build a Pro Co Rat clone. Got it pre-drilled with three holes for the knobs, one for the LED, one for the foot switch, 2 for I/O and one for the 9V input on the sides. The PCB I bought online fits perfectly in the enclosure with its long side along the enclosure's short side, which is ideal. If everything is neatly organized in the enclosure, even with PCB, pots, jacks, foot switch and battery there is still a little bit of room left. I'm planning on adding an LED and a 9V input plug, which should still fit nicely.

Was this review helpful to you?


Browse for more products in the same category as this item:

Diecast Aluminum Enclosure
Diecast Aluminum Enclosure > 125B